Description

Used product. The SUNON KDE2406PTV1 13.MS.A.GN is a DC axial cooling fan for industrial applications, belonging to SUNON's MagLev series and designed for forced ventilation of electronic equipment and power systems.
The photographs clearly identify model KDE2406PTV1, with 24 VDC supply and 1.7 W power indicated on the nameplate. The fan features the compact 60 × 60 × 25 mm format, four mounting holes, and a 2-wire connection with red/black wires and a 2-pin connector.
The component is used, with dust and normal superficial signs of use on the plastic frame and blades, with no obvious housing damage visible in the photographs.

⚙️ Technical Specifications

• Manufacturer: SUNON
• Series: MagLev
• Model: KDE2406PTV1
• Part Number: 13.MS.A.GN
• Type: DC axial cooling fan
• Technology: MagLev / VAPO
• Supply voltage: 24 VDC
• Power indicated on nameplate: 1.7 W
• Dimensions: 60 × 60 × 25 mm
• Connection: 2-wire
• Bearing technology: VAPO / MagLev
• Rated speed: approximately 4,500 rpm
• Airflow: approximately 23.5 CFM
• Static pressure: approximately 0.21 inH₂O
• Noise level: approximately 33.5 dBA
• Weight: approximately 56 g
• Construction: Square plastic frame
• Mounting: 4 mounting points

SUNON technical documentation for the KDE2406PTV1 specifies the 60 × 60 × 25 mm format, 24 VDC supply, approximately 4,500 rpm, 23.5 CFM airflow, and approximately 33.5 dBA noise level. Some versions of the same model designation are listed with 1.9 W consumption; for the photographed unit, the identifying value should be considered the 1.7 W rating shown on its nameplate.

🔧 Operation and Features

The KDE2406PTV1 uses a compact axial ventilation system designed to dissipate heat generated by electronic components.
The MagLev/VAPO technology is designed to provide smooth operation and good reliability for continuous-duty applications. The standardized 60 × 60 × 25 mm format allows the fan to be installed in existing cabinets, electronic equipment, and cooling systems, provided that the supply voltage, dimensions, and airflow requirements are compatible.

🏭 Applications

The fan can be used for cooling:

• Inverters and power converters
• Industrial power supplies
• Electrical and electronic cabinets
• UPS and power systems
• Automation equipment
• Industrial electronic systems
• Telecommunications equipment
• Industrial computers and embedded systems
• Equipment requiring 24 VDC forced ventilation

The 2-wire configuration is suitable for applications requiring only positive and negative power connections, without a separate tachometer signal.

🛠️ Construction and Installation

The fan features four corner mounting points and an approximate 25 mm depth, allowing installation in confined spaces.
The connection must strictly respect the DC polarity and 24 VDC nominal supply voltage. Before final installation, it is advisable to check that the blades rotate freely and that there are no foreign objects, excessive friction, or abnormal vibration.

🛡️ Safety and Product Condition

The photographed unit is used and shows dust and normal signs of use. The photographs cannot certify the condition of the motor or bearings; therefore, unless specifically tested, the fan should not automatically be considered tested or fully operational.

For a sale as a tested component, the following checks are recommended:

• Start-up at 24 VDC
• Electrical current consumption
• Smooth rotation
• Any abnormal noise or vibration
• Stable rotational speed
• Cable and connector integrity

📦 Package Contents

• 1 × SUNON KDE2406PTV1 cooling fan
• Part Number 13.MS.A.GN
• 24 VDC supply
• 2-wire connection
• Dimensions 60 × 60 × 25 mm

🚀 Final Description

The SUNON KDE2406PTV1 13.MS.A.GN is a compact 24 VDC industrial axial cooling fan, particularly suitable as a replacement for electronic systems and industrial equipment using the 60 × 60 × 25 mm format.

Its MagLev/VAPO technology, approximately 4,500 rpm speed, and approximately 23.5 CFM airflow make it suitable for forced cooling of electronic and power components.

Used product with normal signs of use. Electrical and mechanical operation should be verified before installation if required.