Name: easy FRONIUS IG 4,240,103 A-4600 Wels photovoltaic monitoring dataloger box
Brand: Green Energy
Price: 200.0 EUR
Availability: OutOfStock

easy FRONIUS IG 4,240,103 A-4600 Wels photovoltaic monitoring dataloger box

(4.19)

33 verified purchases

€200,00 EUR

Imposte incluse.

€166,67 (Excl. VAT)

Spiacenti, è esaurito.

Ma possiamo farti sapere quando sarà di nuovo disponibile.

Esaurito

Discount

Spend €500+	3% OFF
Spend €3 000+	5% OFF
Spend €8 000+	10% OFF
Spend €12 000+	Custom Quote

Garanzia inclusa

Semplice e senza stress — gestiamo i problemi senza burocrazia.

Assistenza post-vendita

Dall’installazione alle domande — siamo al tuo fianco anche dopo la vendita.

Descrizione

1. Introduction

The Fronius IG Datalogger Box Easy is designed to monitor and record data from a Fronius IG series photovoltaic inverter. It collects electrical parameters, inverter status, and performance data for analysis, storage, and remote monitoring.

Model: 4,240,103 A‑4600
Type: Photovoltaic monitoring datalogger

2. Safety Instructions

⚠️ Important: Always read all safety instructions before installation or operation.

Only qualified personnel may install or operate the device.
Disconnect all power before connecting or disconnecting cables.
Avoid water, dust, or direct sunlight exposure.
Use only approved cables and connectors.
Do not open the datalogger; internal components contain no user-serviceable parts.

3. Package Contents

Datalogger Box Easy 4,240,103 A‑4600
RS‑232 or USB cable for PC connection
Mounting hardware
Quick Start Guide

4. Device Overview

Input: Connects to inverter via COM interface (COM card inside inverter).
Output: USB or RS‑232 to PC for data download.
LED indicators:
- Power – green when powered
- Data – flashes during data transfer
- Error – red if communication fails

5. Installation

Ensure the inverter has a COM card installed.
Mount the datalogger near the inverter using the supplied screws.
Connect the datalogger to the COM card using the supplied cable.
Connect the datalogger to a PC via USB or RS‑232 if local monitoring is required.
Power up the inverter; the datalogger will automatically start recording data.

6. Operation

6.1 Data Collection

The datalogger continuously records inverter output parameters, including:
- AC/DC voltage and current
- Energy production (kWh)
- Power (W)
- Operational status and error codes

6.2 Data Download

Connect the datalogger to a PC.
Use Fronius IG.access software or compatible monitoring software.
Download recorded data and save for analysis or archiving.

6.3 Remote Monitoring (Optional)

If connected to a modem or network interface, the datalogger can transmit data to a central monitoring server.
Ensure network configuration matches your service provider settings.

7. Maintenance

Clean the enclosure with a dry, soft cloth.
Check cables and connectors periodically.
Inspect LED indicators; persistent error light requires professional service.

8. Troubleshooting

Symptom	Possible Cause	Solution
Power LED off	No power from COM card	Check inverter COM card and cable connection
Data LED not flashing	No communication with inverter	Verify cable connection, restart inverter
Error LED on	Communication failure or internal fault	Reconnect datalogger, consult Fronius service if persists

9. Technical Data

Power supply: via COM card (12 V DC typical)
Communication: RS‑232 / USB
Temperature range: −20 °C … +60 °C
Storage capacity: depends on monitoring interval (typical 1–5 min)
Dimensions: 120 × 80 × 40 mm (approx.)

10. Contact & Support

Official support: Fronius International GmbH
Website: https://www.fronius.com
Technical support: support@fronius.com