Description
Used product. The Phoenix Contact VC-K-T3 is a mobile housing for industrial connectors from the VARIOCON series, VC3 version, made of grey plastic. It is designed to protect and accommodate the corresponding connector/insert, providing a robust solution for electrical connections in industrial applications. The photographed component features an angled cable outlet, screw locking system and an M25 cable gland marked IP68.
The product code is 1852961. The configuration shown in the photographs includes the housing, locking system and M25 cable gland.
⚙️ Key Features
-
Brand: Phoenix Contact
-
Series: VARIOCON
-
Model: VC-K-T3
-
Manufacturer Part Number: 1852961
-
Type: Mobile housing for industrial connector
-
Version: VC3
-
Color: Grey
-
Housing Material: Polyamide
-
Cable Outlet: Angled
-
Number of Cable Outlets: 1
-
Cable Gland: M25
-
Locking System: Screw locking
-
Mounting Screws: M4
-
Housing: Unshielded
🔧 Construction
The housing is made of polyamide with UL 94 V-0 flammability classification. It features EPDM/NBR sealing elements, an NBR O-ring and stainless-steel locking screws. The angled cable outlet allows the cable to be routed laterally or in a straight direction.
📐 Dimensions
-
Width: 33 mm
-
Height: 75 mm
-
Length: 96 mm
-
Weight: Approx. 61.5 g without packaging
💧 Protection & Operating Environment
Phoenix Contact documentation specifies an IP67 protection rating according to DIN IEC 60529, as well as IP65, for the VC-K-T3 housing, with an operating temperature range of -40 °C to +80 °C.
Important: The cable gland installed on the housing is clearly marked IP68 in the photographs. Therefore, it is correct to specify M25 IP68 cable gland, but IP68 should not be attributed to the complete housing, as the manufacturer's specified rating for the VC-K-T3 is IP67/IP65.
🔌 Applications
The housing is designed for industrial connection systems and can be used for:
- Industrial automation
- Machinery and industrial plants
- Electrical panels and equipment
- Control systems
- Industrial electrical connections
- Applications using VARIOCON connectors
🔩 Mounting System
The model uses a screw-locking system with cylindrical-head screws and M4 mounting screws. The specified tightening torque is 1.2–1.8 Nm.
📦 Product Condition
Used product. The housing shows normal signs of previous use and handling, as visible in the photographs, while retaining its external structure, locking system and M25 cable gland. Before installation, it is recommended to check the condition of the seals, threads and locking system.
⚠️ Technical Note
The connector must not be connected or disconnected under load. The manufacturer also recommends using only undamaged components and inspecting the product before commissioning.
